TOUGH GEL STRONG BASE ANION EXCHANGE RESIN TYPE II

Tulsion A-32 is a ‘Tough Gel’ strong base anion exchange resin based on polystyrene matrix containing quaternary ammonium Type II groups.

Tulsion A-32 has excellent physical characteristics due to its crack-free quality.

Tulsion A-32 has slightly lower basicity than Type I resin and as such shows greater regeneration efficiency and operating capacity at equivalent regeneration levels compared to Type I resins with relatively better rinse performance.

Tulsion® A-32 is recommended where removal of strong as well as weak acids is necessary at high regeneration efficiencies. However, due to slightly lower basicity, silica leakage is marginally higher compared of Type I anion resin, when used in two bed systems along with strong acid cation exchanger.

TYPICAL CHARACTERISTICS

Type: Gel type strong base anion exchange resin

Matrix structure: Polystyrene copolymer

Functional group: Quaternary ammonium Type II

Physical form: Moist spherical beads

Ionic form: Chloride

Screen Size USS (wet): 16-50

Particle size: 0.3 to 1.2 mm

Total Exchange Capacity: 1.3 meq/ml min

Moisture content: 47 ± 3%

Swelling (approx): Chloride to Hydroxide : 12%

Solubility: 140 F (60 °C)

Backwash settled density: 43 to 45 lbs/ft (690 to 720 g/l)

pH range: 0 to 14

Solubility: Insoluble in all common solvents